Payne Furnace 11 Error Code

What the 11 code means

No previous code. On Payne furnaces such as the PG92ESA, PG95ESA and PG96VTA, code 11 means nothing is stored in the control's fault memory; stored codes are erased automatically after 72 hours. This is a status indication, not a failure.

Likely causes

  1. Normal operation - no fault has been stored
  2. An older fault aged out after 72 hours or was manually cleared

How to fix it — step by step

  1. No repair is needed for code 11 by itself
  2. Run the furnace through a full heating cycle from the thermostat
  3. If a different code appears during the cycle, note it - that is the active fault
  4. If the furnace misbehaves but only ever shows 11, have a technician watch a live cycle

Parts that commonly fix the 11 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Payne furnace error codes

See all Payne furnace codes & guides →