Mazda Sedan Mazda6 Engine Overheating
What this problem usually means
RepairPal lists engine overheating due to a failed cooling fan control module as the most commonly reported Mazda6 problem: the engine may overheat due to erratic engine cooling fan operation as a result of a faulty cooling fan control module. Because the fan may work intermittently, the temperature can climb in traffic or at idle while seeming normal at highway speed.
Likely causes
- Failed cooling fan control module causing erratic fan operation
- Cooling fan motor failure
- Low coolant from a separate leak, which must be ruled out
- Thermostat stuck closed producing overheating with a working fan
How to fix it — step by step
- Stop and let the engine cool if the temperature gauge climbs into the red; driving an overheating engine risks head gasket damage
- Check the coolant level only when the engine is cold, and look for leaks before blaming electronics
- With the engine hot and the A/C on, confirm whether the cooling fans actually run; a silent fan with a hot engine supports the module or fan fault → Shop the cooling fan at Amazon
- Replace the cooling fan control module if the fans have power and ground but do not run when commanded → Shop the cooling fan control module at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the cooling fan control module.
Shop the cooling fan control module at Amazon
Also tied to this fault: cooling fan - Shop at Amazon
Parts that commonly fix it
- cooling fan control module - Shop at Amazon
- cooling fan - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.