Mazda Sedan Mazda3 Vibration At Highway Speed
What this problem usually means
A vibration felt at about 55 mph on a Mazda3 may not be a tire problem: RepairPal reports that Mazda has revised motor mounts available which may help remedy the vibration. Worn or collapsed mounts let the engine and drivetrain shake transmit into the body at cruising speed, mimicking a wheel balance fault.
Likely causes
- Worn or collapsed engine motor mount → Shop the engine motor mount at Amazon
- Mount rubber deteriorating with age and heat
- Tire balance or a bent wheel, which must be ruled out rather than assumed
How to fix it — step by step
- First rule out the simple causes: tire balance, tire damage and wheel damage, since those are cheaper and common
- Note whether the vibration changes with throttle at the same speed; a mount-related vibration usually changes with engine load, a tire vibration usually does not
- Inspect the motor mounts for cracked rubber, sagging or fluid leakage from a hydraulic mount
- Fit the revised Mazda motor mount if the original is collapsed or torn
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the engine motor mount.
Parts that commonly fix it
- engine motor mount - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.