Mazda Sedan Mazda3 Clutch failure
What this problem usually means
Clutch failure is a common 2010 and 2011 Mazda3 problem that caused acceleration and stalling issues. Many owners of these model years had to replace the clutch despite having only about 37,000 miles on the car.
Likely causes
- premature clutch wear or failure
How to fix it — step by step
- Note slipping - engine rpm rising without matching acceleration - or difficulty engaging gears
- Check whether the car stalls or judders pulling away, which owners reported with this failure
- Avoid riding the clutch while the problem is diagnosed, as a slipping clutch wears fast
- Have a shop inspect and replace the clutch assembly, and check the flywheel while it is apart → Shop the flywheel at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the clutch kit.
Also tied to this fault: flywheel - Shop at Amazon
Parts that commonly fix it
- clutch kit - Shop at Amazon
- flywheel - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.