Mazda Sedan Mazda3 Thermostat stuck open

What this problem usually means

Owners of some 2004-2010 and 2013 Mazda3s report a stuck thermostat that caused the engine's temperature to drop - the engine runs cold instead of reaching normal operating temperature. Replacing the thermostat resolves the issue.

Likely causes

  1. thermostat stuck open

How to fix it — step by step

  1. Watch the temperature gauge on a longer drive - it stays low and the heater blows lukewarm
  2. Scan for thermostat or coolant temperature fault codes → Shop the thermostat at Amazon
  3. Check the coolant level is correct before condemning the thermostat
  4. Replace the thermostat and refill and bleed the cooling system

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Mazda Sedan Mazda3 problems

See all Mazda Mazda3 codes & guides →