Mazda Sedan Mazda3 Clunking noise from rear end
What this problem usually means
Some Mazda3 owners (2004-2012 and 2014-2015 cars) hear rattling and clunking noises from the rear end, usually caused by loose, bent or rusted sway bar links. A replacement sway bar link is an inexpensive part.
Likely causes
- loose sway bar links
- bent or rusted sway bar links
How to fix it — step by step
- Drive slowly over uneven pavement and note whether the rattle and clunk come from the rear
- Have the car inspected on a lift for loose, bent or corroded rear sway bar links → Shop the sway bar link at Amazon
- Replace the worn sway bar links, normally in pairs
- Road-test over the same surface to confirm the noise is gone
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the sway bar link.
Parts that commonly fix it
- sway bar link - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.