LG Window Air Conditioner CH34 Error Code
What the CH34 code means
Safety relay trip on LG room/window air conditioners: the unit shut down because of abnormal pressure in the sealed system. LG states this is a protective feature designed to keep the unit from overheating, not a defect in itself.
Likely causes
- Unit sitting in direct sunlight and overheating
- Dirty condenser coils restricting airflow and heat rejection
- Extremely hot weather combined with continuous full-load operation
How to fix it — step by step
- Turn the unit off and let it cool down
- Clean the condenser coils and make sure the air filter is clean and airflow around the back of the unit is unobstructed
- Shade the unit from direct sunlight, for example with an awning, without blocking airflow
- Instead of switching the unit fully off when away, raise the set temperature so the unit cycles less hard on your return
- If CH34 keeps recurring after cleaning and shading, have a technician check the sealed system
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the CH34 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official LG manual is on LG's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.