LG Window Air Conditioner CH Error Code
What the CH code means
Generic fault indication on LG window air conditioners such as the LW8016ER (LW-series): the appliance's automatic error-monitoring system has detected a problem and the display shows 'CH'. The LW-series owner's manual instructs the owner to call the LG Customer Information Center when 'CH' appears.
Likely causes
- Internal fault detected by the unit's self-diagnosis system (sensor, control board or compressor-side fault)
- Temporary power or communication glitch
How to fix it — step by step
- Note any number shown alternating with 'CH' on the display - together they form the specific fault code
- Unplug the unit for several minutes, then restore power and restart it
- If 'CH' returns, stop using the unit and contact LG service with the full code and model number
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the CH code
No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official LG manual is on LG's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.