LG Window Air Conditioner E4 Error Code
What the E4 code means
Not an error code on LG room/window air conditioners: E4 indicates the unit has entered defrost mode because it detected ice on the evaporator coil behind the front grille. Normal operation resumes automatically once defrosting finishes.
Likely causes
- Ice/frost forming on the evaporator coil
- Dirty air filter restricting airflow over the coil
- Running the unit in cool outdoor temperatures or with the temperature set very low
How to fix it — step by step
- No action is required - wait for the defrost cycle to finish and the unit to resume cooling
- Clean the air filter to restore airflow
- If E4 appears constantly, run the unit in Fan Only mode to thaw the coil, then set a slightly higher temperature
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the E4 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official LG manual is on LG's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.