Lennox Furnace E201 Error Code

What the E201 code means

On newer Lennox furnaces (EL296, SL280, SLP98, ML296 and similar) showing three-digit codes from the Lennox Residential Communicating Systems Alert Code Guide, E201 means an indoor blower motor fault — the control lost communication with the blower motor, so there is no safe airflow for heating.

Likely causes

  1. Blower motor lost power
  2. Loose wiring between the control board and blower motor
  3. Failed variable-speed blower motor
  4. Power outage or brownout glitch

How to fix it — step by step

  1. Turn furnace power off for 60 seconds and back on once — communication sometimes recovers after an outage
  2. Confirm the breaker is on and the blower door is fully seated
  3. If E201 returns, call a technician to test the motor power and communication harness

Parts that commonly fix the E201 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Lennox furnace error codes

See all Lennox furnace codes & guides →