Lennox Furnace E207 Error Code
What the E207 code means
On newer Lennox furnaces (EL296, SL280, SLP98, ML296 and similar) showing three-digit codes from the Lennox Residential Communicating Systems Alert Code Guide, E207 means the hot surface igniter is sensed open — the igniter circuit is open, usually because the igniter has cracked or failed.
Likely causes
- Cracked or burned-out hot surface igniter
- Loose igniter connector
- Open igniter wiring
How to fix it — step by step
- Confirm the thermostat is calling for heat
- Reset power once and listen for the ignition sequence
- If the igniter never glows and E207 returns, stop resetting
- Call a technician to test igniter resistance (Lennox specifies roughly 39-70 ohms on SureLight igniters) and replace it
Parts that commonly fix the E207 code
- hot surface igniter - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.