Lennox Furnace E229 Error Code

What the E229 code means

On newer Lennox furnaces (EL296, SL280, SLP98, ML296 and similar) showing three-digit codes from the Lennox Residential Communicating Systems Alert Code Guide, E229 means ignition occurred on high fire — an informational alert, not a failure: the low-fire pressure switch did not close in time, so the furnace lit on high fire instead. Lennox classes this as Information only and no action is required.

Likely causes

  1. Low-fire pressure switch slow to close
  2. Marginal vent or drain restriction on low fire

How to fix it — step by step

  1. No action is required if the furnace is heating normally
  2. Keep an eye on whether it appears constantly, which can hint at a developing vent or drain restriction
  3. Mention it at the next service visit if it shows up on every cycle

Parts that commonly fix the E229 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Lennox furnace error codes

See all Lennox furnace codes & guides →