Kenmore Washer 110 Series (Whirlpool-Built) Oasis Top-Load uL Error Code

What the uL code means

Unbalanced load on Kenmore 110-series (Whirlpool-built) Oasis top-load washers. The washer runs an imbalance correction routine at the end of the wash and before final spin, and shows uL if the load stays uneven.

Likely causes

  1. Load bunched on one side of the basket
  2. Single heavy item such as a bath mat or robe
  3. Washer not level

How to fix it — step by step

  1. Open the lid and redistribute the load evenly around the basket
  2. Add one or two similar items if washing a single heavy item
  3. Close the lid and press START to resume
  4. Check the washer is level if uL happens with normal loads

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the uL code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Kenmore manual is on Kenmore's support site — you'll need your model number.

Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.

Related Kenmore Washer 110 Series (Whirlpool-Built) Oasis Top-Load error codes

See all Kenmore 110 Series (Whirlpool-Built) Oasis Top-Load codes & guides →