Kenmore Washer 110 Series (Whirlpool-Built) Oasis Top-Load Ld Error Code
What the Ld code means
Long drain on Kenmore 110-series (Whirlpool-built) Oasis top-load washers: the washer is taking too long to drain water from the tub. Sears PartsDirect lists this as Ld or F32 on this platform.
Likely causes
- Drain hose kinked or clogged
- Drain hose installed incorrectly or pushed too far into the standpipe
- Object caught in the drain pump
- Failed drain pump
How to fix it — step by step
- Check the drain hose for kinks and clogs and straighten it
- Check the drain hose is installed correctly at the standpipe
- Clean out the pump filter or trap if your model has one → Shop the drain pump at RepairClinic
- Restart the cycle and call for service if the code returns with a clear drain path
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the drain pump.
Parts that commonly fix the Ld code
- drain pump - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Kenmore manual is on Kenmore's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.
Related Kenmore Washer 110 Series (Whirlpool-Built) Oasis Top-Load error codes
See all Kenmore 110 Series (Whirlpool-Built) Oasis Top-Load codes & guides →