Kenmore Washer 110 Series (Whirlpool-Built) Oasis Top-Load LF Error Code
What the LF code means
Long fill on Kenmore 110-series (Whirlpool-built) Oasis top-load washers: the washer is taking too long to fill with water. Sears PartsDirect lists this as LF or F30 on this platform.
Likely causes
- Water supply faucets not fully open
- Inlet hoses kinked or clogged
- Clogged inlet valve screens → Shop the water inlet valve at RepairClinic
- Low house water pressure
How to fix it — step by step
- Turn both water faucets fully on
- Straighten the inlet hoses and check them for clogs
- Clean the screens at the inlet hose connections
- Press STOP to clear the display, then restart the cycle
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the water inlet valve.
Parts that commonly fix the LF code
- water inlet valve - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Kenmore manual is on Kenmore's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.
Related Kenmore Washer 110 Series (Whirlpool-Built) Oasis Top-Load error codes
See all Kenmore 110 Series (Whirlpool-Built) Oasis Top-Load codes & guides →