Jeep SUV Renegade Trailer hitch may separate

What this problem usually means

Some Renegades had a factory accessory tow hitch attached with only a single fastener per side instead of the three per side required, so the trailer hitch assembly may separate from the vehicle without warning and anything towed may no longer be properly connected, increasing crash risk. CarBuzz quotes this from NHTSA Campaign 16V545000, which required a recall to correct the missing fasteners.

Likely causes

  1. trailer hitch assembly attached with only a single fastener per side instead of three → Shop the trailer hitch assembly at Amazon
  2. missing hitch fasteners letting the assembly separate from the vehicle

How to fix it — step by step

  1. Stop towing with the factory accessory hitch until its fasteners have been checked
  2. Check by VIN whether the recall applies, specifically NHTSA Campaign 16V545000 quoted in the source
  3. Inspect the hitch mounting points and count the fasteners on each side
  4. Have a dealer install the missing fasteners or correct the hitch assembly under the recall
  5. Confirm the hitch is secure on both sides before towing again

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Jeep manual is on Jeep's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Jeep SUV Renegade problems

See all Jeep Renegade codes & guides →