Jeep SUV Renegade Excessive oil consumption
What this problem usually means
First-generation (2015-present) Renegades are known for oil consumption, which 1A Auto traces to the piston rings: oil gets past the rings and burns, so the level falls between changes. The fix path starts with checking the oil regularly, about every thousand miles if a problem is suspected, and having a dealer start an oil consumption test.
Likely causes
- oil getting past the piston rings and burning → Shop the piston rings at Amazon
- oil level falling low between oil changes without a visible leak
How to fix it — step by step
- Check the oil with the dipstick, wipe, reinsert and confirm the level is between the hash marks
- Top up with the correct oil if the level is low and record the mileage and amount added
- Re-check the level about every 1,000 miles to measure how fast oil is being used
- Have a dealer start an oil consumption test if use is excessive
- Have the engine repaired or replaced as the consumption test results and warranty dictate
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the piston rings.
Shop the piston rings at Amazon
Also tied to this fault: engine oil - Shop at Amazon
Parts that commonly fix it
- piston rings - Shop at Amazon
- engine oil - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Jeep manual is on Jeep's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.