Jeep SUV Renegade Ignition coil failure

What this problem usually means

Ignition coils are the number-one problem 1A Auto lists for the first-generation (2015-present) Renegade: the symptom is a check engine light that will most likely be flashing with the engine running rough. Often it is not the coil itself but its boot, because corrosion gets into the spark plug tubes, makes the boots work less efficiently and puts more strain on the coil.

Likely causes

  1. corrosion in the spark plug tubes damaging the coil boots
  2. failing ignition coil straining against a poor boot connection
  3. worn spark plugs contributing to the misfire

How to fix it — step by step

  1. Stop driving if the check engine light flashes, since that indicates a misfire that can damage the catalytic converter
  2. Scan for misfire codes to identify which cylinder is affected
  3. Remove that coil and inspect the tube and boot for corrosion, cleaning out any corrosion found
  4. Replace the coil and boot, and replace the spark plugs at the same time, using the Jeep-specific dielectric grease → Shop the spark plugs at Amazon
  5. Clear the code and road-test to confirm the engine runs smoothly

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Jeep manual is on Jeep's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Jeep SUV Renegade problems

See all Jeep Renegade codes & guides →