Ford SUV Explorer Water pump leaking coolant
What this problem usually means
Fifth-generation Explorers from 2011 to 2019 with the naturally aspirated Duratec or EcoBoost 3.5-liter V6 have an internal, timing-chain-driven water pump that can leak. Coolant loss can lead to overheating, coolant mixing with oil, head gasket failure, and a cracked cylinder head if it is not caught early.
Likely causes
- leaking internal water pump seal
- coolant mixing with engine oil
How to fix it — step by step
- Stop driving if the temperature rises or the oil looks milky, and let the engine cool
- Check the coolant level and look for leaks around the alternator area
- Have a shop pressure-test the system and confirm the internal water pump is leaking → Shop the water pump at Amazon
- Replace the water pump, which requires major engine disassembly
- Change contaminated oil and monitor coolant level closely after repair
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the water pump.
Parts that commonly fix it
- water pump - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.