Ford SUV Explorer All-wheel drive PTU failure
What this problem usually means
Fifth-generation Explorers from 2011 to 2019 are prone to failure of the power transfer unit that drives the all-wheel drive system. Heat from the nearby engine and catalytic converter cooks the PTU fluid, and symptoms include grinding noises, loss of all-wheel drive, and a burnt fluid or propane smell.
Likely causes
- ptu fluid degraded by heat
- internal ptu gear wear
How to fix it — step by step
- Stop driving if grinding becomes severe or all-wheel drive is lost
- Check for a burnt smell or fluid leaking near the front drivetrain
- Have a shop inspect the PTU and change its fluid if it has not failed
- Replace the power transfer unit if internal damage is confirmed → Shop the power transfer unit at Amazon
- Change PTU fluid about every 30,000 miles to reduce repeat failure
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the power transfer unit.
Parts that commonly fix it
- power transfer unit - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.