Ford SUV Explorer Timing chain rattle on startup
What this problem usually means
Explorers with the 4.0-liter V6 SOHC engine used from 1997 to 2010 had timing chain guides prone to breaking after several years. Owners call the resulting startup noise a death rattle; as it worsens the engine sounds like a diesel and can run very poorly or not at all.
Likely causes
- breaking plastic timing chain guides
- worn timing chain components
How to fix it — step by step
- Stop driving if the rattle becomes constant or the engine runs poorly, to limit engine damage
- Listen for a rattle on cold startup that fades or worsens as the engine warms
- Have a shop inspect the timing chain guides and tensioners → Shop the timing chain guides at Amazon → Shop the timing chain at Amazon
- Replace all timing chain components at the front and rear of the engine, which requires engine removal
- Keep up regular oil changes with quality synthetic oil to protect the new components
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the timing chain guides.
Shop the timing chain guides at Amazon
Also tied to this fault: timing chain - Shop at Amazon
Parts that commonly fix it
- timing chain guides - Shop at Amazon
- timing chain - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.