Ford SUV Explorer Loss of power steering
What this problem usually means
On Car Problem Zoo data summarized for the fifth-generation Explorer from 2011 to 2019, the most common issue is a sudden loss of power steering. The electric-assisted steering rack can fail through its motor or sensor, making the vehicle very hard to maneuver at slow speeds, sometimes after grinding or rubbing noises when turning.
Likely causes
- electric power steering motor failure
- power steering sensor failure
- failing steering rack
How to fix it — step by step
- Stop safely if steering suddenly becomes heavy, and do not force the wheel at speed
- Note any power steering fault warning and whether restarting temporarily restores assist
- Have a shop scan the electric power steering system for fault codes
- Replace the power steering rack if the motor or sensor has failed → Shop the power steering rack at Amazon
- Confirm full steering assist returns at parking and road speeds
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the power steering rack.
Parts that commonly fix it
- power steering rack - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.