Ford SUV Explorer Transmission slipping and shifting hard

What this problem usually means

Third-generation Explorers from 2002 to 2005 with the 5R55 automatic, and related second- and fourth-generation V6 models, commonly develop transmission failure between about 50,000 and 100,000 miles. Symptoms include slipping, delayed or jerky shifts, shift flare, a blinking overdrive light, and clunking into gear, often from a worn servo bore leaking fluid pressure or a broken solenoid pack.

Likely causes

  1. worn transmission servo bore leaking fluid pressure → Shop the transmission servo at Amazon
  2. broken solenoid pack
  3. worn transmission bands from prolonged slipping

How to fix it — step by step

  1. Stop driving if gears are lost or the overdrive light keeps blinking, and park safely
  2. Check the transmission fluid level and condition if a dipstick is fitted
  3. Have a shop test line pressure and scan for transmission fault codes
  4. Repair the servo bore seal and replace the solenoid pack if testing confirms them
  5. Rebuild or replace the transmission if bands or internal parts are already worn out

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Ford SUV Explorer problems

See all Ford Explorer codes & guides →