Ecovacs Deebot X1 Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 21 problems covered.
Shop Ecovacs Deebot X1 parts at Amazon
- After returning to the Station, DEEBOT does not empty the Dust Bin — The robot docks but auto-emptying does not start.
- AIVI Visual Detection Sensor cannot recognize objects — The AIVI sensor fails to identify objects in front of the robot.
- Ash leakage occurs during working (dust leakage) — Dust leaks while the robot or station is working.
- DEEBOT does not respond to the Station instruction — The robot ignores commands from the OMNI Station.
- DEEBOT gets stuck while working and stops — The robot becomes tangled or trapped and stops cleaning.
- DEEBOT is not able to connect to ECOVACS HOME App — App setup fails and the robot cannot be paired with the ECOVACS HOME App.
- DEEBOT is not charging — The robot is at the OMNI Station but not charging.
- DEEBOT returns to the Station before it has finished cleaning — The robot goes back to the station before the job is done.
- DEEBOT Side Brushes drop out of place during use — A side brush comes off while cleaning.
- Driving wheels are blocked — One or both driving wheels cannot turn.
- During cleaning, DEEBOT appears in route disorder, running bias, repeated cleaning, small area leakage — The cleaning route looks disordered, the robot drifts, repeats areas or misses small areas.
- Fail to empty the Dust Bin — Auto-emptying runs but does not empty the dust bin properly.
- Fail to enable Child Lock — Child Lock cannot be switched on.
- Mopping Pad Plate cannot rotate — The mopping pad plate will not spin.
- No signal found. Unable to return to the Station — The robot cannot find the station signal and cannot return to charge.
- Running is very loud during cleaning — The robot runs much louder than normal.
- The inner side of Dust Collection Cabin is dirty — Fine dust coats the inside of the OMNI Station's dust collection cabin.
- The map is lost — The saved home map disappears from the app.
- Unable to create furniture map on App — The app cannot build the furniture map after cleaning.
- Video Manager cannot open or has no screen — The app's Video Manager will not open or shows no picture.
- Voice prompt: the Cleaning Sink is full — When the water in the Cleaning Sink is full and cannot be drained out, the voice reports that the Cleaning Sink is full.