Ecovacs Robot vacuum Deebot X1 DEEBOT is not charging
What this problem usually means
The robot is at the OMNI Station but not charging.
Likely causes
- DEEBOT is not switched ON
- DEEBOT's Charging Contacts are not connected to the Station Pins, or the contacts are dirty
- The Station is not connected to the power supply
- The battery is completely discharged
How to fix it — step by step
- Switch ON DEEBOT
- Make sure the robot's Charging Contacts have connected to the Station Pins and the AUTO Mode Button flashes; clean the Charging Contacts and Station as described in the Maintenance section
- Make sure the Power Cord is firmly connected to the Station
- If the battery is completely discharged, contact ECOVACS Customer Care for help → Shop the battery at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Battery.
Parts that commonly fix it
- Battery - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Ecovacs Robot vacuum Deebot X1 problems
- DEEBOT returns to the Station before it has finished cleaning
- DEEBOT Side Brushes drop out of place during use
- Driving wheels are blocked
- During cleaning, DEEBOT appears in route disorder, running bias, repeated cleaning, small area leakage
- Fail to empty the Dust Bin
- Fail to enable Child Lock
- Mopping Pad Plate cannot rotate
- No signal found. Unable to return to the Station
- Running is very loud during cleaning
- The inner side of Dust Collection Cabin is dirty
- The map is lost
- Unable to create furniture map on App