Ecovacs Robot vacuum Deebot X1 No signal found. Unable to return to the Station
What this problem usually means
The robot cannot find the station signal and cannot return to charge.
Likely causes
- The Station is incorrectly placed
- The Station is out of power or was manually moved
- DEEBOT does not start cleaning from the Station
- The charging route is blocked, for example the door of the room with the Station is closed
How to fix it — step by step
- Place the Station correctly according to the instructions in the Charging DEEBOT section
- Check whether the Station is connected to the power supply; do not move the Station
- Start DEEBOT cleaning from the Station
- Keep the charging route clear
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Ecovacs Robot vacuum Deebot X1 problems
- Running is very loud during cleaning
- The inner side of Dust Collection Cabin is dirty
- The map is lost
- Unable to create furniture map on App
- Video Manager cannot open or has no screen
- Voice prompt: the Cleaning Sink is full
- After returning to the Station, DEEBOT does not empty the Dust Bin
- AIVI Visual Detection Sensor cannot recognize objects
- Ash leakage occurs during working (dust leakage)
- DEEBOT does not respond to the Station instruction
- DEEBOT gets stuck while working and stops
- DEEBOT is not able to connect to ECOVACS HOME App