Bosch Washer E25 Error Code

What the E25 code means

The turbidity (Aqua) sensor is faulty — the sensor that measures how dirty the wash water is is not reporting correctly. Bosch states this fault cannot be rectified by the user.

Likely causes

  1. Failed turbidity sensor → Shop the turbidity sensor at RepairClinic
  2. Limescale or detergent build-up on the sensor
  3. Wiring fault to the sensor

How to fix it — step by step

  1. Unplug the washer for a few minutes, then restore power and restart to rule out a one-off glitch
  2. Run a drum-clean or hot maintenance wash to clear detergent and limescale build-up
  3. If E25 returns, book a technician — the sensor is internal

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the E25 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Bosch manual is on Bosch's support site — you'll need your model number.

Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.

Related Bosch Washer error codes

See all Bosch washer codes & guides →