Bosch Washer F27 Error Code

What the F27 code means

The pressure sensor is faulty — the washer cannot reliably measure the water level in the drum. Bosch states this fault cannot be rectified by the user. It is also shown as E27 on some models.

Likely causes

  1. Failed pressure sensor
  2. Blocked pressure sensor hose or air chamber
  3. Wiring fault to the sensor

How to fix it — step by step

  1. Unplug the washer for a few minutes, then restore power and restart to rule out a glitch
  2. Make sure the washer drains completely and clean the pump filter if needed
  3. If F27 returns, book a technician

Parts that commonly fix the F27 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Bosch washer error codes

See all Bosch washer codes & guides →