Bosch Washer E16 Error Code
What the E16 code means
The washing machine door is open or has not latched properly, so the programme cannot start or continue.
Likely causes
- Door not pushed fully closed
- Laundry trapped between the door and the seal
- Door catch or hinge misaligned
- Faulty door lock → Shop the door lock at RepairClinic
How to fix it — step by step
- Unplug the washer before checking anything hands-on
- Open the door, remove any laundry trapped in the seal, and close the door firmly until it clicks
- Check the door seal and catch for visible damage or debris and wipe them clean
- Plug back in and restart the programme
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the door lock.
Parts that commonly fix the E16 code
- door lock - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Bosch manual is on Bosch's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.