Audi SUV Q7 Uneven Ride Height

What this problem usually means

Some earlier Q7s have a problem with faulty pressure valves in the air suspension, per CarBuzz: owners with a faulty pressure valve notice one side of the car sitting lower than the other. An adjustable air suspension is more complicated and can fail sooner than conventional springs, and uneven height can result in uneven tire wear and more stress on other suspension parts.

Likely causes

  1. Faulty air suspension pressure valve → Shop the air suspension pressure valve at Amazon
  2. Leaking air spring on the low corner
  3. Ride height sensor fault misreporting one corner
  4. Air compressor weakening and unable to maintain height

How to fix it — step by step

  1. Park on level ground after the car has sat and measure or photograph each corner's height
  2. Watch whether the low corner pumps back up on starting; recovery points to a leak, no recovery to the compressor or valve
  3. Have air suspension codes read and the system leak-tested before replacing parts
  4. Replace the faulty pressure valve, air spring or compressor as diagnosed, and check tire wear afterwards → Shop the air spring at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Audi SUV Q7 problems

See all Audi Q7 codes & guides →