Audi SUV Q7 Coolant leak

What this problem usually means

The Q7's cooling system uses numerous plastic parts - flanges, a plastic water pump housing and a plastic thermostat housing - that go brittle with heat cycles. A hairline crack can spray coolant onto hot exhaust, causing steam, overheating risk and, if ignored, head gasket failure on the aluminum block. Common failure points are the coolant flange on the rear of the cylinder head, the water pump housing, the thermostat housing and a seam crack in the expansion tank.

Likely causes

  1. Cracked plastic coolant flange on the rear of the cylinder head
  2. Cracked plastic water pump or thermostat housing
  3. Expansion tank cracking at its seam

How to fix it — step by step

  1. Check the coolant level in the expansion tank when cold and note how quickly it drops → Shop the coolant expansion tank at Amazon
  2. Look for pink or white crusty residue and wet areas around the water pump, thermostat housing and flanges → Shop the water pump at Amazon → Shop the thermostat at Amazon
  3. Watch the temperature gauge; stop and let the engine cool if it climbs above normal, and never open a hot pressurised system
  4. Have the system pressure-tested to find the exact leak before replacing parts
  5. Replace the failed components; at high mileage many owners replace the pump, thermostat, flange, tank and hoses together, refilling with G13 coolant only → Shop the coolant flange at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Audi SUV Q7 problems

See all Audi Q7 codes & guides →