Audi Q7 Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 10 problems covered.
- Carbon buildup — The Q7's direct-injection 3.0T and 4.2L FSI engines never wash fuel over the backs of the intake valves, so oil vapor from the PCV system…
- Coolant leak — The Q7's cooling system uses numerous plastic parts - flanges, a plastic water pump housing and a plastic thermostat housing - that go…
- Engine Misfire On Startup — Owners of earlier Q7s reported rough idle, jumping rpm and a check engine light on cold starts, with the engine misfiring on multiple…
- Faulty Knock Sensor — A faulty knock sensor on the Q7 should be replaced promptly rather than overlooked, per CarBuzz: the sensor listens for abnormal engine…
- No Start After Refueling — After refueling, some Q7 owners reported popping sounds from the trunk area and, on some occasions, a car that would not start, per…
- Timing chain rattle on cold start — On early Q7s with the supercharged 3.0T V6 (2009-2015), the timing chain tensioner and plastic guide rails can fail prematurely. The…
- Transmission shuddering at light throttle — The 8-speed Tiptronic in 2011-2015 Q7s can develop a torque converter shudder felt as a vibration at 35-45 mph under light throttle, along…
- Turbocharger wastegate rattle — On the second-generation Q7's turbocharged 3.0T (EA839, 2016-2019), the electronic wastegate actuator can strip its internal gear teeth or…
- Uneven Ride Height — Some earlier Q7s have a problem with faulty pressure valves in the air suspension, per CarBuzz: owners with a faulty pressure valve notice…
- Wheel bearing growling noise — The Q7's unitized hub wheel bearings tend to growl by 70,000-100,000 miles. The noise is a speed-dependent growl or hum that typically…