Audi SUV Q7 Timing chain rattle on cold start

What this problem usually means

On early Q7s with the supercharged 3.0T V6 (2009-2015), the timing chain tensioner and plastic guide rails can fail prematurely. The warning sign is a cold-start rattle like marbles in a tin can lasting 2-5 seconds, plus possible camshaft correlation codes (P000A/P000B) and rough idle. If the slack chain jumps teeth, valves bend and pistons are damaged. Audi bulletin TSB 2011737 extended tensioner warranty coverage on certain VINs, though it has now expired for almost all cars.

Likely causes

  1. Hydraulic timing chain tensioner losing pressure → Shop the timing chain tensioner at Amazon
  2. Shattered or worn plastic timing chain guide rails → Shop the timing chain at Amazon
  3. Chain stretch aggravated by long oil-change intervals

How to fix it — step by step

  1. Listen on a cold start for a 2-5 second metallic rattle that fades as oil pressure builds
  2. Scan for camshaft position correlation codes and note any rough idle
  3. Stop driving the car if the rattle persists beyond a few seconds or the check engine light flashes
  4. Have an Audi specialist inspect the chains, guides and tensioners; this is rear-of-engine work
  5. Replace chains, guides and tensioners as a set, then keep to 5,000-mile oil changes with approved-spec oil

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Audi SUV Q7 problems

See all Audi Q7 codes & guides →