Amana Washer Front-Load rL Error Code
What the rL code means
Items were detected in the washer during the Clean Washer cycle (also shown as F34 on some models). The cleaning cycle must run empty.
Likely causes
- Laundry left in the drum
- Items added during the Clean Washer cycle
How to fix it — step by step
- Open the door and remove all items from the drum
- Close the door fully
- Restart the Clean Washer cycle with the drum empty
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the rL code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Amana manual is on Amana's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.