Amana Washer Front-Load F7 E1 Error Code
What the F7 E1 code means
A motor speed sensing error: the motor cannot achieve the correct speed for the cycle selected.
Likely causes
- Shipping bolts still installed on a new washer
- Washer overloaded
- Motor or speed sensor fault
How to fix it — step by step
- Check that all shipping bolts have been removed
- Remove part of the load if the washer is overloaded
- Press Pause or Cancel twice and Power once to clear the code
- If the code returns on a normal load, call for service for the motor/sensor circuit
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the drive motor.
Parts that commonly fix the F7 E1 code
- drive motor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Amana manual is on Amana's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.