Amana Washer Front-Load LOC Error Code
What the LOC code means
Control Lock has been activated, so the controls are locked and the washer will not respond to most buttons.
Likely causes
- Control Lock turned on intentionally
- Control Lock button pressed and held accidentally
How to fix it — step by step
- Find the Control Lock button on the control panel
- Press and hold the Control Lock button as shown in your owner's manual
- Check the LOC display clears and the controls respond again
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the LOC code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Amana manual is on Amana's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.