Whirlpool Washer Top-Load HE Ofb Error Code
What the Ofb code means
Out-of-balance load: the washer is running a load-balance correction routine.
Likely causes
- Load unevenly distributed around the washplate
- Single heavy item washed alone
- Adding wet items or extra water unbalancing the basket
How to fix it — step by step
- Allow the washer to continue its correction routine
- If it stops with the dial flashing, redistribute the load evenly in loose heaps around the washplate
- Balance a single item with a few extra items such as towels
- Close the lid and press Start/Pause
- Check the washer is level if this happens often
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the Ofb code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.