Whirlpool Top-Load HE Error Codes
Find your code in the list below. Each page explains what the code means, the most likely causes, step-by-step fixes you can do yourself, and the parts that commonly resolve it. 9 codes covered.
Shop Whirlpool Top-Load HE parts at RepairClinic or Amazon
- drn — The washer is not draining properly, often an installation problem with the drain hose.
- HC — Hot and cold inlet hoses are reversed: the cold hose is on the hot inlet and the hot hose is on the cold inlet. The code appears at the end…
- LdL — The lid is not locking.
- LdU — The lid cannot unlock.
- LF — Long fill: the washer is taking too long to fill with water. This is the top-load display for the same fault as F8 E1.
- lid — The washer lid was left open.
- Ofb — Out-of-balance load: the washer is running a load-balance correction routine.
- OL — Overload: the washer load was too large, so the washer drains the water and detergent.
- PF — Power failure: the wash cycle was interrupted by a power failure (top-load models).