Volvo Sedan S60 Timing belt failure

What this problem usually means

The S60's five-cylinder engines are interference designs driven by a timing belt that must be renewed to interval (roughly every 120,000-160,000 km or up to 10 years depending on engine), with the water pump replaced at the same time because the belt drives it. There is usually no warning before a belt breaks; afterwards the engine will not start, cranks unusually freely, or has already suffered bent valves from piston contact. Squealing or rattling from the belt drive and coolant loss from a leaking water pump are the only real advance clues.

Likely causes

  1. Timing belt run past its replacement interval → Shop the timing belt kit at Amazon
  2. Failing belt-driven water pump or tensioner pulley triggering the break
  3. Oil contamination of the belt from ageing seals

How to fix it — step by step

  1. Check the service history for a documented belt, tensioner and water pump change; treat an undocumented belt as overdue → Shop the water pump at Amazon
  2. Listen for squealing or rattling from the belt drive and check for coolant loss at the water pump
  3. Do not start or crank an engine suspected of a broken belt; internal damage may already have occurred
  4. Replace the belt kit and water pump together as preventive maintenance if the history is unknown
  5. If the belt has failed, the repair is cylinder head work for bent valves

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Volvo Sedan S60 problems

See all Volvo S60 codes & guides →