Volvo Sedan S60 PCV Oil Trap Blockage

What this problem usually means

The PCV oil trap is the first-generation S60 five-cylinder's Achilles heel (2001-2009 B5244T/B5254T engines, some 2010-2014 Gen2 five-cylinders too, usually after about 120,000 km): the plastic breather box under the intake manifold and its hoses clog with carbon and sludge, crankcase pressure builds, and oil is pushed past camshaft and crankshaft seals. The definitive test is a whistle or hiss that stops when you remove the oil filler cap.

Likely causes

  1. Clogged PCV breather box (oil trap) under the intake manifold
  2. Brittle, cracked PCV hoses → Shop the pcv hoses at Amazon
  3. Crankcase over-pressure blowing oil past cam and crank seals
  4. Sludge build-up from extended oil intervals

How to fix it — step by step

  1. Do the filler-cap test: whistling that stops with the cap removed confirms crankcase ventilation trouble
  2. Check for a dipstick pushed up and for fresh oil leaks at several seals at once
  3. Replace the entire breather box and hose kit - patch repairs do not last on aged plastic
  4. Replace seals that have already been pushed out once pressure is back to normal
  5. Shorten oil intervals afterwards to slow re-clogging

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Volvo Sedan S60 problems

See all Volvo S60 codes & guides →