Volvo Sedan S60 Knocking noise over bumps

What this problem usually means

On the first-generation S60, the front suspension top mounts knock over bumps, and control arms and wheel bearings also wear out. A knock on turn-in is the test-drive tell for worn top mounts. The parts are individually inexpensive, but the diagnosis matters because several front-end parts can knock.

Likely causes

  1. Worn front strut top mounts
  2. Worn control arms
  3. Worn wheel bearings

How to fix it — step by step

  1. Drive slowly over bumps and note whether the knock comes from the front and whether it appears on turn-in
  2. Have the car lifted and the top mounts, control arms and wheel bearings checked for play and wear → Shop the wheel bearings at Amazon → Shop the control arms at Amazon
  3. Rule out a loose wheel or worn anti-roll bar links before replacing major parts
  4. Replace the worn components; top mounts are commonly done with strut work → Shop the strut top mounts at Amazon
  5. Have a wheel alignment checked after front suspension work

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Volvo Sedan S60 problems

See all Volvo S60 codes & guides →