Trane Furnace E04 Error Code
What the E04 code means
On Trane S-series furnaces with a seven-segment display (S9X1, S9X2, S9B1 and S8X1, S8X2), code E04 means an open limit — the main thermal limit, a flame rollout switch, or the reverse airflow switch has opened, usually from overheating. On S8V2 models this fault is split into E4.0, E4.1 and E4.2 instead.
Likely causes
- Dirty air filter restricting airflow
- Closed registers or blocked returns
- Failing blower motor
- Tripped rollout switch
How to fix it — step by step
- Turn the thermostat down and let the furnace cool
- Replace the air filter and open all supply registers
- Make sure returns are not blocked
- Restore the heat call once; if E04 returns, call a technician — a rollout trip needs a cause found before reset
Parts that commonly fix the E04 code
- limit switch - Shop at RepairClinic
- rollout switch - Shop at RepairClinic
- blower motor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.