Subaru SUV Forester Rear coil spring broken
What this problem usually means
On 2014 to 2018 Foresters the rear coil springs can break, causing the rear suspension to sag. A sagging rear end changes ride height and handling and can wear tires unevenly until the springs are replaced.
Likely causes
- broken rear coil springs
How to fix it — step by step
- Park on level ground and compare rear ride height side to side for visible sag
- Listen for clunks over bumps and note any change in handling or steering feel
- Avoid heavy loads and rough roads until the suspension is inspected
- Have a shop inspect the rear springs and replace broken coil springs in pairs → Shop the rear coil springs at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the rear coil springs.
Parts that commonly fix it
- rear coil springs - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.