Subaru SUV Forester Excessive oil consumption
What this problem usually means
Foresters with the 2.5-liter engine, especially 2011 to 2014 models, can use far more oil than normal and need frequent top-ups between services. Running low on oil risks overheating and accelerated engine wear, so the level needs regular checking.
Likely causes
- oil burning in the 2.5-liter engine
How to fix it — step by step
- Check the oil level on the dipstick regularly and top up with the correct grade before it reaches the low mark
- Track how much oil you add and over how many miles so you can show the pattern to a shop
- Watch for a low oil warning light or blue smoke on cold starts and note when they happen
- Have a shop test oil consumption and inspect the engine if use stays high
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the engine oil.
Parts that commonly fix it
- engine oil - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.