Subaru SUV Forester Head gasket leaking
What this problem usually means
Third-generation Foresters from 2009 to 2013, in models prior to 2012, are known for blown head gaskets. A failed gasket can leak oil and coolant and let the engine overheat, which can cause much larger engine damage if driving continues.
Likely causes
- head gasket failure
How to fix it — step by step
- Stop driving and let the engine cool if the temperature gauge climbs or steam appears, and do not open a hot cooling system
- Check coolant and oil levels once cool and look for milky oil or coolant loss
- Note any white exhaust smoke, sweet coolant smell, or repeated overheating
- Have a shop pressure-test the cooling system and replace the head gasket if it has failed → Shop the head gasket at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the head gasket.
Parts that commonly fix it
- head gasket - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.