Subaru SUV Forester Brake line corrosion
What this problem usually means
Foresters from 2009 to 2013 were recalled for brake line corrosion that could let brake fluid leak and cause a loss of braking power. Longer stopping distances from a fluid leak are a serious safety risk until the lines are repaired.
Likely causes
- corroded brake lines
- brake fluid leaking
How to fix it — step by step
- Stop driving if the brake pedal feels soft, sinks, or stopping distance grows, and park safely
- Check the brake fluid reservoir level and look for wet spots or drips under the car
- Check by VIN whether the brake line corrosion recall applies to your Forester
- Have a dealer or shop inspect and replace corroded brake lines and refill and bleed the brake system → Shop the brake lines at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the brake lines.
Parts that commonly fix it
- brake lines - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.