Samsung Oven Older Models (E-Codes) SE Error Code
What the SE code means
Defective / shorted key on the control panel, on older Samsung ranges. This is the older equivalent of the newer C-d0 stuck-key code.
Likely causes
- Shorted or defective key on the control panel
- Moisture on the touch panel
- Loose or damaged wire harness to the electronic control board
- Failed control panel or control board
How to fix it — step by step
- Clean and dry the control panel and try again → Shop the control panel at RepairClinic
- Unplug the range or switch off the breaker for at least 30 seconds, then restore power and restart
- Do not open the control console yourself; Sears' repair steps involve internal wiring checks
- If the code returns, call for service to test the panel and control board
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the control panel.
Shop the control panel at RepairClinic or Amazon
Also tied to this fault: oven electronic control board - Shop at RepairClinic or Amazon
Parts that commonly fix the SE code
- control panel - Shop at RepairClinic or Amazon
- oven electronic control board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.
Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.