Samsung Oven Older Models (E-Codes) E-08 Error Code
What the E-08 code means
Oven not heating / oven heating error on older Samsung ranges: the oven was called to heat but did not heat. Also written as E08.
Likely causes
- Failed bake element
- Failed broil element
- Oven temperature sensor off by more than 200 ohms → Shop the oven temperature sensor at RepairClinic
- Damaged wiring between the control board and the elements
How to fix it — step by step
- Turn the oven off and visually check the bake and broil elements for blistering or breaks, without touching wiring → Shop the broil element at RepairClinic → Shop the bake element at RepairClinic
- Try a reset at the breaker for at least 30 seconds and test bake once
- If there is still no heat, call for service; element and sensor testing involves 240V parts
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the bake element.
Shop the bake element at RepairClinic or Amazon
Also tied to this fault: broil element - Shop at RepairClinic or Amazon; oven temperature sensor - Shop at RepairClinic or Amazon
Parts that commonly fix the E-08 code
- bake element - Shop at RepairClinic or Amazon
- broil element - Shop at RepairClinic or Amazon
- oven temperature sensor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.
Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.