Samsung Oven Older Models (E-Codes) E28 Error Code
What the E28 code means
Oven temperature sensor is defective (electrically shorted) on older Samsung electric ranges: its resistance is under 930 ohms instead of about 1080 ohms at room temperature. The newer equivalent family is C-20.
Likely causes
- Shorted oven temperature sensor → Shop the oven temperature sensor at RepairClinic
- Damaged sensor wiring shorting together
- Control board sensor circuit fault
How to fix it — step by step
- Press CLEAR/OFF and restart the oven once
- If the code returns, switch off power at the breaker and stop using the oven
- Call for service to test and replace the sensor or wiring
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the oven temperature sensor.
Parts that commonly fix the E28 code
- oven temperature sensor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Samsung manual is on Samsung's support site — you'll need your model number.
Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.