Roborock Robot vacuum Error 10

What this problem usually means

Filter blocked or not completely dry (worded 'please check that the filter is dry or clean the filter' on E-series and earlier models; newer Q5+/S7 manuals list the same fault without a number as 'Filter blocked or wet'). A wet or clogged filter restricts airflow.

Likely causes

  1. Filter still wet after washing
  2. Filter clogged with dust and fine debris
  3. Filter worn out and no longer clearing with cleaning

How to fix it — step by step

  1. Remove the filter and tap it clean against a bin
  2. If it was washed, leave it to dry completely for at least 24 hours before refitting
  3. Refit the dry filter and dustbin correctly
  4. Restart cleaning, and replace the filter if the error keeps returning

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Roborock robot vacuum problems

See all Roborock robot vacuum codes & guides →